Johnson Controls Series Damper Actuator - M9104-IGA-3S

Johnson Controls Series Damper Actuator - M9104-IGA-3SFeatures: Simple direct coupling reduces installation and commissioning time and improves reliability by eliminating damper linkages. Single screw coupling provides three-point shaft gripping.Small, compact design allows installation in tight-fitting locations designed for zone damper actuator applicationsRotation range 93 degrees CW or CCWFits 3/8 to 1/2¿ (10 to 13 mm) round or 3/8¿ (10 mm) square shaftOn-off, floating and proportional control inputsProportional models are dip switch selectable for DA / RA and DC 0.10 V or DC 2.10 V operationDC 0(4) . 20 mA proportional control w/optional 500 Ohm resistorModels available with 30 or 60 second running time at 60 HzLong life brushless synchronous drive motor technology - provides constant running time independent of loadRobust 18 lb-in (2 Nm) and 35 lb-in (4 Nm) torque ratingWhisper quiet 35 dBA noise ratingMagnetic clutch - provides over torque protection over the entire range of rotation-4 to 125°F (-20 to 52°C) ambient temperature rating100,000 full stroke cycle, 1,500,000 reposition ratingManual gear release simplifies setup and field adjustments position feedback (GGX models) provides simple, closed-loop control with accurate position sensing.cULus Listed, CE Mark Product Specifications BRANDJohnson Controls TEMPERATURE CONTROL RANGE °F-4 to 125 TIMING60 sec timing at 60 hz TORQUE35 lb-in (4 nm) POWER REQUIREMENTSAC 24 V 50/60 Hz TYPEFloating with Timeout LIMITED WARRANTY YEARS1