Johnson Controls Damper Actuator - M9116-AGC-2

Johnson Controls Damper Actuator - M9116-AGC-2Features: Simple direct coupling reduces installation and commissioning time while improving reliability by eliminating damper linkagesRobust 140 lb-in (16 Nm) torque ratingRotation range 0 to 90° in 5° increments, mechanically limited to 93°Fits 3/8 to 3/4¿ (10 to 20 mm) round shaft, 3/8 to 5/8 (10 to 16 mm) square shaft; 1 (25.4 mm) diameter jackshaft with M9000-154 adapterOn-off, floating and proportional control inputs meet the needs of most applicationsOutput position feedback provides simple closed-loop control with accurate position sensingMaster/slave operation allows synchronized control for two actuators stacked for tandem applications - doubles rated torque outputElectronic stall detection ensures higher reliability by deactivating the actuator motor when a stall condition is detectedJumper selectable DC 0(2).10 V or DC0(4).20 mA, proportional controlZero and span adjustment (HGx models) allows sequential operation of dampers from a single input signal of DC 0(2).10 V, DC 0(4).20 V or DC 0(4).20 mAJumper-selectable rotation direction and manual gear release simplify installation, setup, and field adjustments2-SPDT optional auxiliary switches1/2 NPT threaded housing provides easy connection for electrical fittingsManual gear release simplifies damper /valve setup and commissioning-4 to 122°F (-20 to 50°C) ambient temperature rangeRated for 60,000 full stroke cyclesUL Listed, CSA Certified, CE Mark Product Specifications BRANDJohnson Controls TEMPERATURE CONTROL RANGE °F-4 to 122 TIMING70 - 115 sec timing TORQUE140 lb-in (16 nm ) POWER REQUIREMENTSAC 24 V 50/60 Hz DC 24V AUXILLIARY SWITCHES2-SPDT TYPEOn-Off / Floating LIMITED WARRANTY YEARS1