Johnson Controls Damper Actuator - M9106-Agc-2

Johnson Controls Damper Actuator - M9106-AGC-2Features: Simple direct coupling reduces installation and commissioning time and improves reliability by eliminating damper linkages. Single screw coupling provides three-point shaft grippingDesigned for zone damper and ball valve actuator applicationsSmall, compact design - allows installation in tight-fitting locationsRotation range adjustable 30 to 90 degrees CW or CCWFits 3/8 to 1/2 (10 to 13 mm) round or 3/8 (10 mm) square shaftOn-off, floating and jumper selectable DC 0(2).10 V or DC 0(4).20 mA proportional controlJumper selectable DA / RA operation60 second running time at 60 HzLong life brushless synchronous drive motor technology - provides constant running time independent of loadRobust 53 lb-in (6 Nm) torque ratingWhisper quiet 35 dBA noise ratingMagnetic clutch - provides over torque protection over the entire range of rotation2-SPDT optional auxiliary switches-4 to 125°F (-20 to 52°C) ambient temperature rating100,000 full stroke cycle, 2,500,000 reposition ratingManual gear release simplifies setup and field adjustments1/2 NPT threaded conduit opening meets electrical code requirements and allows the use of flexible armored cablePosition feedback (GGX models) provides simple, closed-loop control with accurate position sensingAdjustable rotation stops allow application versatility with 30 to 90° clockwise or counterclockwise rotationUL Listed, CSA Certified, CE Mark Product Specifications BRANDJohnson Controls TEMPERATURE CONTROL RANGE °F-4 to 125 TIMING60 sec timing at 60 hz TORQUE53 lb-in (6 nm) POWER REQUIREMENTSAC 24 V 50/60 Hz AUXILLIARY SWITCHES2-SPDT TYPEFloating LIMITED WARRANTY YEARS1