LABULK 0335 is an intelligent tap density tester used to measure the tap density of powders. It consists of touch panel, printer, electronic balance, tap assembly, motor and glass cylinders. LABULK 0335 is designed to meet all currently known international standards. The parameters are flexible to set in order to get standardized results as per users diversified requirements. In addition to auto measurement, auto print and auto calculation of tap density, LABULK 0335 can also automatically measure the flowability of this powder such as Hausner Ratio and Compressibility Index.
Physical Property to measure: tap density,
Hausner ratio, Compressibility Index
Sample Loading Volume: 5-250 mL
Timing range: 0-99999 sec
Counting range: 0-999999
Tap height: 3 or 14 mm
Frequency: 250/300/custom
Measurement: W33 x D 31 x H23 cm
(Cylinder excepted)
Power: 220V/110V/50/60Hz
l New generation of operating system, control the operation by 7” LCD touch panel
l Automatic communication check between host and modules and host and accessories.
l Alternative testing mode, tap time or number freely set
l Tap height selection, being printed on the test report
l In addition to default frequency, user can freely set any rpm to meet special requirement
l In addition to SOP tap number, user can freely set any tap number to meet special requirement.
l During test all the set parameters are visible to understand and evaluate working conditions
l RS-232 connects host and balance, weight data automatically shown on LCD
l Simply a touch to print reports in very detail
l Flowability such as Hausner ratio or Compressibility are obtained during measure tap density
l 2 login status eitherAdministor or User, accessed by password, GMP compliance NEW !
l Database storages test results NEW !
l Only Administor has right to change time or delete records, GMP complicance NEW !
