Product Specs:
The model 4500 (4530 metric) lathe is a standard model 4000 (4100 metric)
3.5” x 8” lathe upgraded to include two adjustable “zero” handwheels on the
crosslide and leadscrew. The lathe includes the motor and its speed controller,
a 2.75″ (70mm) x 6.0″ (152mm) crosslide, 15″ (381mm) steel bed to allow 8″ (203mm)
between centers, pulleys, belt, faceplate, lathe dog, two dead centers, three
hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot,
three-wire power cord and instruction booklet.
This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88”
over the carriage without riser blocks. With an optional riser block, parts up
to 6” in diameter can be turned over the bed. The lathe has 8” of space between
centers. The electronic speed control allows continuously variable speed control
from 70 to 2800 RPM without belt changes.
There is a second pulley position available that offers extra torque at low RPM
if needed.Adjustable zero handwheels allow the user to reset the handwheel to a
zero reading at any time without moving the leadscrew. This makes dialing in the
next dimension easier, as you are starting from zero each time. It also helps
eliminate math errors. This is a feature normally found on expensive full-size
machines, but not often available on a machine of this size and price.
4500B Package Includes:
- 2.5″ 3-jaw Chuck
- 1/4″ Tailstock Chuck
- 1074 Steady rest
- 1191 Live Center
- 3002 Cutoff Tool and Holder
- 3007 3-pc 1/4″ HSS Cutting Tool Set (LH, RH, Boring)
- 3020 5/32″ T-driver
- 3021 3-pc Center Drill Set
- 5327 Sherline Accessories Shop Guide Book
| Condition: | New |
