Brand: BEST VALUE VACS
Features:
- Electrical Requirements: 110v 60Hz single phase, 400 watts, Pumping Rate: 5.6CFM, Ultimate vacuum without gas ballast: 0.3 micron, Ultimate vacuum with gas ballast: 6 micron.
- Inlet/Oulet connection: KF25/NW25 Flange, Oil Volumne: 1L/1.06 quarts, Motor Rate: 1720 RPM, Woking Temperature: 5C to 40C, Recommended oil: Ultragrade 19.
- Air-cooled, thermally protected motors enclosed in a durable aluminum housing, Gas ballast valve for deeper vacuum, Steel inlet KF25 flange port with multiple intake size, Plastic handle, skid-resistant rubber base.
- Unit Dimensions: 17 x 6.75 x 9.75", Unit Weight: 46lbs, Shipping Dimensions: 23 x 8.5 x 13, Shipping Weight: 55lbs, CE Compliance: Yes
- Signature REQUIRED Upon Delivery of this item.
BVV
Details:
This is the Best Value Vacs Brand 5.6CFM Two Stage Pro Series vacuum pump. The BVV Pro Series 5.6CFM will pull a vacuum down to 0.3 micron effortlessly. The pump is designed with long term continuous operation in mind. Comes standard with clamps, centering rings and oil mist exhaust filter which returns trapped oil back to the pump and allows for quieter operation. Also includes a gallon of premium vacuum pump oil. Adjustable gas ballast keeps moisture, solvent, and other contaminants from getting stuck in the pump.
Pump Information:
Customers using solvents such as stabilization resins (MinWax, Gator Venom etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice)
If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener is not to be used with any vacuum pumps, EVER. (A seized motor will result within the first use.)
To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
