Brand: YUCHENGTECH
Features:
- 1.Super torque, electronic constant speed mixer is driven by brushless DC motor, which is suitable for agitation speed, competent for high viscosity media, slurry mixing.
- 2.Running timing control to ensure that the experimental timeliness is effectively controllable. Digital display settings and actual output of stirring speed ensure the intuitive acquisition of experimental data.
- 3. The structure of the machine is reasonable and compact. The ultra-low noise and stirring speed are controlled by microprocessor. It can compensate for the change of speed caused by the change of load and the fluctuation of power supply voltage in time and effectively. The speed is constant and reliable.
- 4. The built-in automatic overload protection device ensures the safety of long-term and high-load continuous operation of the experiment.
- 5. The knob-type control of the running state makes the operation of the experiment more simple and the speed of stirring can be adjusted steplessly to meet the requirement of adjusting the speed of stirring at any time in the experiment.
YUCHENGTECH
Details: Usually the product will be sent in 1-4 working days and takes about 2--7 business days to reach you.
Product Introduction
1.Super torque, electronic constant speed mixer is driven by brushless DC motor, which is suitable for agitation speed, competent for high viscosity media, slurry mixing.
2.Running timing control to ensure that the experimental timeliness is effectively controllable.
Digital display settings and actual output of stirring speed ensure the intuitive acquisition of experimental data.
Parameters:
Rated voltage: AC100-240V
Rated frequency: 50/60 Hz
Input power: 295 W
Output power: 200 W
Drive Type: Brushless DC Motor
Output Torque of Stirring Shaft: 47.8 N.cm
Peak output torque of stirring shaft: 142.0 N.cm
Working mode: S1 (continuous)
Operating State Display: LCD
Operation control mode: combined control knob
Speed regulation range: 30-2000 rpm
Speed Control Type: Stepless
Timing control range: 1-6000 min
Transfer dynamic monitoring function: Yes
Torque dynamic simulation function: Yes
Temperature dynamic monitoring function: Yes
Speed memory function: Yes
Overload protection function:Yes
Fixing method of stirring rod: fast rotary chuck
Clamping range of rotary chuck: 2-13 mm
Penetration Diameter of Stirring Bar (Shutdown): 11 mm
Agitator configuration: four-blade propeller
Stirring capacity (H_2):30 L
Stirring treatment viscosity: 100000 mPa.s
Permissible ambient temperature: not more than 40
Permissible relative humidity: not more than 80%
Protection Level: IP 40
Shape size of the whole machine: 215 x 310 x 720 mm
Whole machine weight: 14.5 kg
EAN: 8085889647807