Brand: YUCHENGTECH
Features:
- 1.Driven by a compact series excitation micro high-speed motor, it is suitable for mixing low to medium and high viscosity liquids in laboratory or pilot plant, and shearing emulsifying granular materials in liquid medium.
- 2.It has overload protection function, speed memory function, can set speed in advance, and can be suspended at any time. Easy to operate, superior performance and low noise.
- 3.The machine is composed of high speed motor, shear emulsifying head and speed control controller. The main engine adopts high quality engineering plastics and die - casting aluminum alloy as the body.
- 4.The working head is refined with high quality stainless steel, demountable, convenient for replacement, cleaning and sterilization.The working head is refined with high quality stainless steel, demountable, convenient for replacement, cleaning and sterilization.
- 5.The fuselage is all made of high quality engineering plastics, which ensures the safety and reliability in use.
YUCHENGTECH
Details: Usually the product will be sent in 1-4 working days and takes about 2--7 business days to reach you.
Working principle
The experimental material circulates in the container to and fro over the working process, and withstands tens of thousands of shearing, tearing, impact and mixing times per minute,
so as to achieve the shear emulsification effect. Its efficiency is about one thousand times higher than that of ordinary stirring.
Parameters:
Rated voltage: AC220 V
Rated frequency: 50/60 Hz
Input power: 850 W
Output power: 500 W
Rated Torque: 17.1 N.cm
Working mode: S1 (continuous)
Operation control mode: combined control knob
Speed Regulation Range (No Load): 2000-28000 rpm
Speed Control Type: Stepless
Speed Digital Display: LED Digital
Timing control range: 1-1000 min
Maximum Torque of Working Head: 17.0 N.cm
Working head material: SS316 (stainless steel)
Permissible ambient temperature: not more than 40
Permissible relative humidity: not more than 80%
Shape size of the whole machine: 215 x 310 x 720 mm
Whole machine weight: 8.7 kg (gross weight: 10 kg)
Work head parameters:
Head Specification (G): 188
Processing capacity (H2O) (ml): 50ï½1500
Suitable for maximum viscosity (mpa.s): 2000
Maximum Rotor Linear Speed (m/s): 15
Minimum/maximum immersion height (mm): 45/160
Stator diameter (mm): 18
Working head length (mm): 222
Maximum operating temperature (): 120
Work head material : SS316
Working head bearing material : PTFE
EAN: 9443389958042