Product Specs
- A powerful 90V DC motor with electronic speed controller.
- 2.75" (70mm) x 6.0" (152mm) crosslide.
- 15" (381mm) steel bed to allow 8" (203mm) between centers.
- Standard 1-5/8" (41mm) laser engraved aluminum handwheels.
- Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
The A Package Includes:
- 2.5" 3-jaw self-centering chuck
- 1/4" tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
Swing Over Bed | 3.50" (90 mm) |
Swing Over Carriage | 1.75" (45 mm) |
Distance Between Centers | 8.00" (200 mm) |
Hole Through Spindle | .405" (10 mm) |
Spindle Nose Thread | 3/4"-16 T.P.I. |
Spindle Nose Taper | #1 Morse |
Spindle runout of Morse taper | .0005" or less |
Travel of Crosslide | 4.25" (110 mm) |
Tailstock Spindle Taper | #0 Morse |
Protractor Graduations | 0° to 45° by 5° |
Handwheel Graduations | .001" (.01 mm) |
Length Overall | 23.5" (597 mm) |
Width Overall | 10.5" (267 mm) |
Height Overall | 8.5" (216 mm) |
Shipping Weight | 24 lb. (10.9 kg |
Motor | 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. |
Spindle Speed Range | 70-2800 RPM continuously variable by electronic speed control |