Brand: Plast-O-Matic
Color: Translucent White
Features:
- Large 360 degree viewing area
- Full flow design; no corners to collect debris
- Double wall Pyrex and acrylic construction for maximum safety
- Designed to withstand reasonable external shocks
- No special hardware required for installation; completely assembled and pre-tested
Plast-O-Matic
Details: Series GY flow indicators utilize a double-wall construction and are used to indicate flow or clarity of highly corrosive or ultra-pure liquids compatible with Pyrex glass. They cannot be used with hydrofluoric acid or sodium hydroxide which will etch the Pyrex cylinder wall. FKM seals are standard. Flow indicators are designed to indicate the presence or clarity of high purity or corrosive liquid in a piping system. For use with ultrapure liquids or chemicals compatible with acrylic. O-ring seals are used on indicators allowing them to seal at extremely low pressures as well as high pressures. Flow indicators are full ported, eliminating any possible flow resistance. All Plast-O-Matic flow and level indicators are easily installed in a piping system. The flow indicators may be installed either vertically or horizontally; however, the level indicators can only be installed vertically. Flow indicators are simply threaded into a piping system. They should only be connected to plastic fittings. Male threads should be wrapped with PTFE tape or other acceptable pipe sealant and only made hand-tight, followed by a one-quarter turn more using a strap wrench. Standard fasteners are stainless steel. The transparent outer cylinder wall is high impact strength acrylic. The inner wall (wetted) is Pyrex. Made of Polypropylene.
