Brand: MXBAOHENG
Color: 200x120x80mm
Features:
- Cooling system rapid cooling.
- Simple and convenient operation.
- High quality corrosion resistant and heat resistant steel.
- Thickening furnace door refractory material.
- Good insulation durability.
MXBAOHENG
Details:
The shipment will take about 7-13 working days to reach you.
This product only has 220V
Technical Parameters:
Model:YTH-2.5-10
Maximum temperature:1000
Internal space:20*12*8CM
Power:2500W
Voltage:220V
Heating element:Iron chrome aluminum alloy resistance wire
Temperature measuring element:Nickel-silicon thermocouple
The resistance furnace adopts the cycle operation type for industrial and mining enterprises, laboratories, scientific research units, quenching of small steel parts, sintering of metals and ceramics, dissolution analysis, etc. and high temperature heating.
Features:
1.Can quickly dissipate heat to better extend the service life of the muffle furnace.
2.The firepower is big and have a wonderful heating effect.
3.The material is resistant to high temperature.
4.The operation of this machine is very simple.
Precautions:1. When the electric furnace is used or is deactivated again after long-term deactivation, it needs to be dried by oven:
Coal furnace temperature: room temperature -200 °C/200-600 °C
Time:4 hours/4 hours
Note: Open the furnace door
2. When the electric furnace is used, the furnace temperature must not exceed the rated temperature, so as not to damage the heating element, and it is forbidden to pay attention to various liquids and dissolved metals directly into the furnace, and often remove iron filings and oxides in the furnace to keep the inside of the furnace clean.
3. Regularly check the electric furnace, and the contact between the connecting parts of the temperature controller's conductive system is good.
EAN: 8793030595470
