Industrial Scientific Precision Measuring Salt Spray Testing Chamber 110V Salt Spray Measuring Testing 239165

Brand: Industrial Scientific

Color: Silver

Features:

• Pakage sizeš1410*880*1280mm ,Internal dimensions:900*600*500mm
• Powerš 110V/2KW(Single-phase electricity)/50Hz
• Air pressure: 1kg/cm^2
• Spray method :Continuous
• It's used to test the corrosion resistance of the electrodeposited coating of many kinds of metallic materials.Use the salt spray test machine to spray the Sodium Chloride Solution to the surface of electric coating to achieve the purpose of detection.The material is stainless steel

CN

Details: All equipment needed in the test:Spray nozzle, salt water barrel, test piece support, spray liquid collection container, test chamber, salt water, supply tank, pressure tank,supply equipment and exhaust equipment required for compressed air,the device is shown in Fig, and test as followed.
1.Blunt material is required, it is required that the material itself cannot be corroded, and it can not affect the corrosion test.
2.The fog nozzle cannot spray the test liquid directly to the sample, the solution at the top of the spraying chamber cannot dropon the test piece.
3.The test liquid dropped from test piece cannot flow back to the salt bucket again for the test.
4.The solution should not contain grease and dust, so you have to prepare an air cleaner.
5.Spray liquid should be collected at least 16 hours,an average per hour can be collected 2ml to 1ml solution. Use the final averageto represent the amount of spray.
6.The concentrationof the Sodium Chloride Solutionshould be maintained at40~60g/L.
7.The temperature of the pressure barrel should be kept in 47+1 degree, temperature of the brine barrel should be kept in 35+1 degree.
Sample placement:
1.If you need to test many pieces, make sure that every major surface can be detected by salt fog at the same time.
2.Permutation of samples, the spray should be free to drop on all the test pieces, preventing the situation of blocking the spray.
3.Each sample cannot be in contact with each other.
4.Salt spray can't drop from one test piece to another one.
5.Sample identification mark should be marked onthe bottom of the test piece.
Items include(239165):
2 bottles of (Nacl)
Nozzel*1
Hydrometer*1
1 pack of PH test pape
,Instuction*1
Measuring cup*1

UPC: 615311278446

EAN: 615311278446