Leeson Motors-1HP, 115/208-230V, 1740RPM, DP, C Face Mount, 1.15 SF, 75 Eff.

General Purpose, Capacitor Start-Inductor Run Motor: 1HP, 1740 RPM, Drip-Proof (DP) Enclosure, 143 Frame, C Face Mount, 115/208-230V, 1PH, 60HZ, Name Plate Amps 12.8/6.4, Continuous duty, 1.15 Service Factor, No thermal protection, Efficiency: 75, Efficiency Type: Standard, Ambient 40 C, Selective CCW Rotation, Shaft Diameter 7/8.Drip proof (DP)enclosure has vents in end shield and/or frame to prevent drops of liquid from falling into motor within a 15 degree angle from vertical. Designed for use in areas that are reasonably dry, clean, and well ventilated (usually indoors). If installed outdoors, it is recommended that the motor be protected with a cover that does not restrict the flow of air to the motor.NEMA C face mount has machined face with a pilot on the shaft end which allows direct mounting with a pump or other direct coupled equipment. Bolts pass through mounted part to threaded hole in the motor face. Product Specifications HORSEPOWER1 ENCLOSUREDP FRAME143TC MOUNTINGC-Face Footless NAMEPLATE RPM1740 PHASE1 MOTOR RPM 60Hz1740 VOLTAGE115/208-230 HERTZ60 DUTYContinuous SERVICE FACTOR1.15 THERMAL PROTECTIONNo EFFICIENCY TYPEStandard AMBIENT TEMP C40 SHAFT DIAMETER7/8 ROTATIONCCW WEIGHT32 ULY CSAY LEESON MODEL NO.C143C17DC2FF UPC69172001651 RPM RANGE1701-1800 BEARING-DRIVE-END6205 FL EFFICIENCY75 FL AMPS12.8/6.4-6.2 BRANDLeeson MANUFACTURER PART #121002.00 is_motorYes DESIGNCapacitor Start Inductor Run ENCLOSURE TYPEOpen/Drip Proof FRAME MATERIALRolled Steel