Brand: JIAWANSHUN
Features:
- 1. The centrifugal force is 1980 xg, the speed is 4000r/min, and the separation effect is strong.
- 2. Capacity: 15mlx8
- 3. Can Timing 0-99 minutes:Microcomputer control, digital display screen, timing 0-99 minutes, easy to operate. In operation, the parameters can be set and centrifuged according to rotational speed or centrifugal force to achieve satisfactory centrifugal effect and end sound prompt.
- 4. Brushless DC Motor Drive, eliminating the trouble of replacement, high efficiency and stability, long service life.
- 5. Application: It can be used in petrochemical industry, medical cosmetology industry. It can be used for the separation of serum, fat and the extraction of PRF. PRP and PRF technology can relieve wrinkles and senility in the medical cosmetology industry, which is a breakthrough technology in the beauty industry.
JIAWANSHUN
Details: The main technical parameters:
Maximum speed: 4000 r / min
Maximum centrifugal force: 1980 xg
Maximum capacity: 15mlx8
Voltage：110V
Motor: Brushless DC Motor Drive
Timing Range: 0-99 min
Dimensions: 340 x270 x270mm
Instructions:
The worktable of the centrifuge should be balanced and fixed,
the workroom should be clean, dry and well ventilated. Open the
centrifuge and wipe the inner chamber and the turning head clean.
Install the test tube with the same weighing, close the cover of the centrifuge,
adjust the speed control knob, and rise to the required speed. Before each shutdown,
the speed control knob must be kept in the minimum position. "Timer" set "zero", turn off
the power switch, cut off the power supply. Wipe the inner chamber and the turning head and
close the centrifuge cover.
Maintenance:
Don't put anything on the cover of centrifuge. After use, be sure to clean and wipe the inner cavity
and head, and cover the centrifugal cover. Open the cover of the centrifuge for a period of time and dry
the inner chamber. Carbon brushes of motors should be replaced in time after 3000 hours to avoid wear and
tear of rectifiers. The natural wear of centrifuge is a normal phenomenon after long-term use.
