Brand: Labconco
Features:
- WaterPro PS-series Type 1 water purification system for use with general lab procedures and both organic and inorganic analysis applications
- Requires deionization resin cartridge, carbon filter kit, and organic adsorption cartridge (all sold separately)
- Dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water and reduction of TOC levels to less than 5 parts per billion (ppb)
- 115V, 60Hz input power with NEMA 5-15 plug for North America use
- ETL Listed mark certification for safety
Details: The Labconco 9000620 WaterPro PS-series water purification system produces Type 1 standard water for use with general lab procedures and both organic and inorganic analysis applications. The system uses deionization, carbon filtration, organic adsorption, and UV irradiation, and requires a deionization resin cartridge, carbon filter kit, and organic adsorption cartridge (all sold separately). It has a dual-wavelength (185/254nm) UV lamp for photo-oxidation of feed water that reduces total organic carbon (TOC) levels to less than 5 parts per billion (ppb). The unit has a 304 stainless steel front panel and a powder-coated steel cabinet. The LED display shows water resistivity in megohms, water temperature, and timed-dispense setting. The system requires potable water pretreated by reverse osmosis, ion exchange, or distillation. It has an inlet water pressure range of up to 100psi. The system replenishes at up to 1.8 liters per minute (LPM) and the dispensed water has up to 18.2 megohm-cm resistivity. A built-in boost pump recirculates treated water to maintain water purity. It accepts 115V, 60Hz input power and has a NEMA 5-15 plug for North America use. This HPLC analytic instrument model polishing station has an ETL Listed Mark certification for safety. Specifications Resistance 18.2 megohm-cm Total organic carbon (TOC) Less than 5ppb Purification type Deionization, carbon filtration, organic adsorption, UV oxidation UV lamp Dual range (185/254nm) Flow rate 1.8LPM Feed water pretreatment requirements Potable water pretreated by reverse osmosis, ion exchange, or distillation Feed water pressure range Up to 100psi Display LED Input power 115V, 60Hz, 5A Power plug NEMA 5-15, North America Standards met ETL Weight 85lb. Dimensions 30.1 x 31.1 x 7.5 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Labconco Corporation manufactures laboratory furniture and equipment such as hoods, ventilated enclosures, and glassware washers for general laboratory use. The company, founded in 1925, is headquartered in Kansas City, MO.
